Home Product Product Product

Greases

Silicone greases start with a base oil of silicone fluid, to which are added various additives and fillers (metal soap, etc.). Silicone greases exhibit thermal oxidation stability over a wide temperature range, offer good moisture-resistance, and are used primarily for lubrication.
Silicone oil compounds are products with a grease-like consistency. They are produced by blending materials such as silica powder into a base oil of silicone fluid. They exhibit thermal oxidation stability over a wide temperature range and have outstanding electrical properties and water repellency. Silicone oil compounds are used primarily in electrical insulators and seals, and for heat dissipation and water repellency.

Product Detail

Features

1、Heat and cold resistance
Because the silicone fluid base oil has good resistance to heat and cold, the drop point is high, there is little oil separation, and volatile content is low.

2、Moisture resistance
These products have good resistance to water and moisture. Silicone greases can be left underwater for long periods; the surface will turn white, but there is almost no internal change.

3、Safety
The silicone fluid base oil is chemically inactive, so these products pose almost no risk to humans and animals.

4、Efficiency
Excellent performance even when used in small amounts.

Typical Products

Category
Applications
Grade
Features
Greases

Low-temperature

lubrication

G-30 Series

Suitable for lubrication in extremely low

temperature applications, in which petroleum

greases cannot be used

High-temperature

lubrication

G-40 Series

Suitable for lubrication of sealed bearings,

Performance complies with MIL-L-15719A.

G-420
Good lubrication particularly at high temperatures

Solvent-resistant

lubricant

FG-720 Series

Especially good boundary lubrication and solvent

resistance

Non-mineral oil

lubrication for rubbers

G-411
For rubber cups of automotive brakes
Plastic lubrication
G-501

Does not cause stress cracking in plastic, Good

lubrication for steel on steel

Adhesive applications

(torque, damper)

G-330 Series
General purpose
G-340 Series

For low temperature applications, Little change in

torque values in temperatures ranging from -30°C

to +60°C

G-630 Series
For bearings, Good feel, Base oil is non-silicone

Oil compounds


KS-62F
Heat-resistant, Paste consistency

Electrical insulation,

seals

KS-62M
Heat-resistant
KS-63W
General purpose
KS-64F
Paste
KS-64

Performance meets MIL-S-8660B specifications.

General purpose

Insulator protection in

salty air, electrical

insulation

KS-63G
Complies with JRS standards
Heat dissipation
KS-609
Thermal conductivity: 0.73W/m·K, General purpose
KS-613

Thermal conductivity: 0.76 W/m·K, Suitable for

thermister potting

G-747
Thermal conductivity: 0.90W/m·K
G-775

Thermal conductivity: 3.6 W/m·K, Highly resistant

to "pump-out"

G-776

Thermal conductivity: 1.3 W/m·K*, Low viscosity,

and yet low oil bleed, Solvent-diluted type

G-777
Thermal conductivity: 3.3 W/m·K, All-purpose type
G-765
Thermal conductivity: 2.9W/m·K, Main application: IGBT
G-750
Thermal conductivity: 3.5W/m·K, Main application: IGBT
G-751
Thermal conductivity: 4.5W/m·K, Main application: CPU
X-23-7762

Thermal conductivity: 4.0 W/m·K (6.0W/m·K*),

Solvent-diluted type, Main application: CPU

X-23-7783D

Thermal conductivity: 3.5 W/m·K (5.5W/m·K*),

Solvent-diluted type, Main application: CPU

X-23-7868-2D

Thermal conductivity: 3.6W/m·K (6.2W/m·K*),

Solvent-diluted type, Main application: CPU

X-23-7921-5
Thermal conductivity: 6.0W/m·K, Main application: CPU
Electrical conduction
KS-660
Suitable for untistatic sealing
KS-660B
High lubricity version of KS-660
High vacuum seals
HIVAC-G

Good thermo-oxidative stability and chemical

stability, Can be used for high vacuums of 10-6 Torr

Rustproof seals
KS-622
Good rustproofing effect on copper
Valve seals
KS-65A

Suitable for sealing and lubrication of valves,

stopcocks, and packing of common chemical equipment

KS-623
Silicone rubbers
KS-650N

Does not cause swelling of silicone rubber, Good

electrical insulation

KS-651

Does not cause swelling of silicone rubber, Good

electrical properties and temperature characteristics

Optical applications
Optseal

Good light transmissivity, Refractive index (25°C)

1.4690, Non-flowable

Optseal-L

Good light transmissivity, Refractive index (25°C)

1.4690, Slightly flowable

Feedback
* Name:
Company name:
Address:
* Tel:
* Phone:
* E-mail:
Content:

All rights reserved:苏州建道电子有限公司

备案号: 苏ICP备17032532号-1

TEL:+0512-69165455    Email:www.wanhu.com.cn

Add:Room 727, Su Shangxin, 555 Guantang Road, Suzhou City, Suzhou, China

Website main products:Transistor Transistor SOT-23-6 Package SOP-8 Package Low Voltage MOS High Voltage MOS Integrated Circuit Memory IC

Applications
Electronic application
Semiconductor sealing
EP system
EP system
Product
Semiconductor sealing
Thermal silicone rubber
Silicone oil
Silicone resin
Silane coupling
RTV silicone
Grease
Silicone powder
Paint additives
Heat shrink tube
News
Industry news
Company News
service & support
Specifications
FAQ
Sales network
After-sales service
About Us
Company Profile
Company culture
Certification
Contact Us
Contact Us
Feedback
download